KT200 ECU List: Find the Right Entry for Your Job
To use the KT200 ECU list, match four things: your controller, the job you need, the connection method and your installed software. Finding the vehicle name is only the first step. The same ECU family can have different entries for different operations.
Updated 28 October 2026 · ECU Tool Store
Choose the engine or transmission list
Use the KT200 ECU support PDF for engine controllers. Use the separate KT200 TCU support PDF for transmission controllers. TCU simply means the gearbox control unit.
These PDFs help you find a likely software entry. They do not show which release is installed on your PC. Save the document link, download date and relevant page, then compare the entry with your own KT200 software.
Keep original KT200 and KT200II information separate. A function added to KT200II should not be assumed to work on the original KT200.
What do R, W and VR mean?
| Label | Plain-English meaning | What to check |
|---|---|---|
| R — read | Reads data from the connected controller. | Which memory areas and file format does this operation save? |
| W — write | Writes a file to the controller. | Is that file suitable for this exact ECU and operation? |
| VR — virtual read | Obtains a matching reference file rather than reading all the data from your own ECU. | Is the required file available, and does obtaining it need internet access? |
A VR file is not a complete copy of the customer's current ECU. A normal read can also cover only part of the memory. If the repair requires a backup, ask which areas must be saved and whether the selected function includes them.
For example, the first ECU-list page shows an Abarth 500 Bosch ME7.9.10 entry as VR/W through OBD. An Abarth Bosch EDC15C7 entry shows R/W using K-line bench mode. The vehicle brand alone does not tell you whether you can make a physical read or how to connect.

Match the connection method, not just the ECU name
OBD normally uses the vehicle's diagnostic socket. Bench uses a supported direct connection to the controller. Boot, BDM and JTAG are more specialised access methods. Use the exact instructions supplied with the selected software entry; the method name by itself is not a wiring diagram.
In KT200 software, the driver is the ECU-specific option you select for the job. It is different from the Windows USB driver that lets the PC recognise the programmer. Record the full ECU-driver path or take a screenshot so support knows which option you mean.
Do not choose a neighbouring entry because its name looks similar. A different processor, hardware revision or memory layout can change what the tool can do.
Collect the controller details before buying
Start with a clear photograph of the complete accessible ECU label. Add the vehicle model, year, engine or gearbox and market where known. Keep any existing diagnostic identification report with it, especially the hardware and software numbers.
If the controller has been replaced or its software changed, mention that. Do not open or remove an ECU just to obtain a photograph for a purchase enquiry.
Then state the actual task: identification, a physical read, VR, write, or a backup of named memory areas. “Can it do this car?” is much less useful than “Can this software read the required memory from this controller in bench mode?”

When should you stop and ask?
Stop if the ECU identity is unclear, the required read/write function is missing, or the instructions do not match the hardware in front of you. A write is not a compatibility test.
Send ECU Tool Store support the label, vehicle details, tool generation, edition, software version, intended operation and matching list page. If you already have an error, include its exact wording and log.
For a purchase, check your two or three most important jobs before choosing the KT200 configuration. For an authorised programming job, keep the original files, follow the selected driver's power and connection instructions, and save the completion log. A checksum result checks data integrity; it does not by itself establish that the calibration is suitable or the repair is complete.