KT200II Audi DL501 Gen.2: Read/Write and Cable Checks
Updated: 9 October 2026 · By: ECU Tool Store · Scope: Audi DL501 Gen.2 read/write enquiries and purchase checks.
KT200II has a reported DL501 Gen.2 read/write case using Pinout mode. The case is a 2013 Audi Q5 quattro S-line, published by ECUHELP on 25 July 2026. Before ordering for your gearbox, send us its identification and the operation you need. “Audi S tronic” or “DL501” alone is not enough to choose a driver and connection set.
If you already own KT200II, include a screenshot of your installed software version and the selected transmission driver. We need to match the actual controller, not just the vehicle badge.
What the Audi case tells you
The ECUHELP DL501 Gen.2 report records read and write through Pinout mode. It names cable DFB6EACBB04 and describes an alternative connection using a multifunction cable and round-pin connectors.
That is a specific reported configuration, not a test we performed. The page does not give a complete software-build and controller-revision record, read duration or recovery procedure. We therefore use it to identify what to check, not to promise the same result on every DL501.
| Recorded in the case | Still needed for your job |
|---|---|
| 2013 Audi Q5 quattro S-line | Actual installed transmission/controller identification |
| DL501 Gen.2 | Part number, hardware/software IDs and confirmed generation |
| KT200II Pinout read/write | Current driver, available operations and connection instructions |
| Named cable and an alternative connection | The correct accessory and its exact applicability |
Do not change a planned OBD job to Pinout simply because the case used it. First establish which operation and mode the current driver supports for your controller. Different mode names are not interchangeable instructions.

Get the gearbox identity right before buying accessories
Start with photographs of the identification you can safely access and any electronic IDs already available from a diagnostic scan. Keep the part number, hardware number and software number together. If the gearbox has been replaced, tell us; its installed identity matters more than the vehicle’s original specification.
Record the vehicle model, model year and transmission description as context. Do not guess the generation from the registration year or a search-result photograph. Ask for confirmation if the labels and the software menu appear to disagree.
Next, explain the work in one sentence: reading the original data, writing an authorised file, or investigating another service requirement. Read/write support does not automatically establish cloning, adaptation or replacement capability. Those require separate confirmation.
Finally, photograph the cable or adapter you intend to use. A listing that mentions DL501 does not tell us which lead you own or whether it matches the selected driver. We need the accessory identifier and the connector view, not a photograph of an unopened shipping box.
Keep customer information and device serial numbers out of public comments. Send them privately through our contact page when needed for the enquiry.
Do you need Auto, Full or another accessory?
Check the controller and requested operation first, then choose the package. Buying a version with more vehicle categories is not a substitute for finding the right transmission driver.
The current Auto product description includes TCU Gear coverage. That broad category is not a revision-specific DL501 approval. Likewise, an Offline dongle changes the eligible tool’s operating environment; it is not a gearbox adapter and does not create a missing protocol.
Use our Auto, Full and Offline comparison for edition selection, then check the current KT200II product options. Confirm the required lead separately against the chosen package. Do not assume that every accessory appearing in a promotional kit photograph is supplied with every option.
If you already have a suitable device and cable, do not order another kit merely because a case uses a different photographed arrangement. Send the details first so the compatibility question can be addressed before the purchase decision.

Before an authorised read/write job
Once the controller, driver and connection documentation agree, keep that identification with the job record. Follow the current driver instructions for the selected mode. This article and its illustrations are not pinout diagrams.
Prepare the workstation and supply according to the equipment and driver requirements. Check the intended USB route, power equipment and physical connection before starting. Do not infer a voltage, terminal position or wiring sequence from a workshop photograph.
Save the original read, identification and operation log in a job-specific folder. Keep proposed write files separate. Record which operation produced each file; a filename such as “backup” does not explain its contents.
Before writing, confirm that the file belongs to the identified controller and is accepted for the chosen operation. Also confirm any checksum handling required by that driver. Read success, matching file size and checksum completion answer different questions.
If the driver, labels or connection instructions do not agree, stop before initiating the operation. If an operation is already underway, do not rearrange connections or restart the program to try another mode. Preserve the on-screen information and request a job-specific next step.
Our interrupted read/write checklist explains what to record for support, not how to recover a DL501.
Can I use the source case as a wiring guide?
No. The case identifies a connection approach, but it does not establish full applicability to your controller revision. Use the current driver documentation after identification. Send us the labels, software version, intended operation and accessory photographs if you need help checking the match.