KT200 Auto to KT200II: What to Check Before Ordering
Before upgrading KT200 Auto to KT200II, settle three points: what hardware you will receive, which software functions you are buying, and whether the old KT200 will remain active. A replacement main unit and an upgrade board are different orders. Do not choose between them from the product name alone.
Updated 28 October 2026 · ECU Tool Store
Are you buying a main unit or a board?
Our KT200-to-KT200II upgrade listing describes a replacement-main-unit route. After the KT200II arrives, you provide both device IDs. The listed activation process locks the old KT200 and activates its replacement.
Other upgrade offers supply a board for the existing unit instead. That does not mean the order includes a new programmer. Board fitting, the software package and activation must all match that particular upgrade.
| Order type | What you need to know |
|---|---|
| Replacement main unit | Which unit is supplied, when activation changes over, and what happens to the old device. |
| Upgrade board | Which hardware revision it fits, who will install it, and which software it requires. |
| Software or licence change | Which functions become available and whether any hardware is also required. |
You do not need to open the case to ask for a quote. Send front and rear photographs, your device ID privately, and the installed software version. Ask us to put the hardware route on the quotation before you pay.

Does an Auto upgrade include Full?
Not unless Full is specified in the order. Here, a licence means the software functions enabled for your device. Moving from KT200 to KT200II and moving from Auto to Full are separate choices.
Tell us which jobs prompted the upgrade. Include the vehicle, exact ECU or TCU, whether you need to read or write, and the intended connection method. The ECU-list guide explains how to collect those details. A newer programmer still needs the right software option for that controller.
If you already own an offline key, include its photograph and ID in the same private enquiry. An old KT200 key should not be assumed to work with KT200II. Ask which key and software package are included in the proposed upgrade.
What should you send before ordering?
- Your current tool: KT200 Auto, clear front and rear photographs, device ID and previous order number if available.
- Your software: package name and version, plus a screenshot if the edition is unclear.
- Your offline equipment: whether you have a key and which device it belongs to.
- Your intended purchase: Auto or Full, replacement unit or board, and whether an offline option is needed.
- Your priority jobs: controller details, required read/write function and connection method.
For this buying enquiry, there is no need to send a customer's original ECU file. Keep device IDs and order details out of public comments. Use our contact page to send the request privately.

Plan the changeover around workshop jobs
Finish active jobs before changing hardware or moving the licence. Save your ECU files and job logs outside the software installation folder. Keep the old unit until the replacement's identity, software and activation have been checked.
For the replacement-unit offer, do not book work on the assumption that both programmers will stay active. If you need a second working tool, raise that before ordering rather than treating the retired KT200 as a guaranteed backup.
For a board order, obtain instructions for the exact supplied revision before installation. This buying guide is not a board-fitting procedure. If a previous board change has already caused an activation problem, send the before-and-after device details with the error instead of trying another firmware package.
Get the complete order in writing
The quotation should name the supplied hardware, destination edition, offline option, activation process and old-device status. Ask for any installation charge, missing accessory or delivery charge to be shown separately.
Pause if the listing, invoice and support message disagree. Resolving that before payment is much easier than discovering after delivery that you bought a board instead of a main unit, or Auto when you needed Full.